Ask for something this tool should do. Reading is free — posting asks for your team access code (last 4 of your cell).
Loading…
1.56 — 2026-11-16 · Fixed the Records table's slider bar disappearing after a visit to another tab — it now shows whenever the table runs wider than the screen, on every tab, every time.
1.55 — 2026-11-16 · Two small polish fixes to the new theme: the tab bar is now properly frosted, so table rows no longer ghost through it while you scroll, and the wide tables show a single slider bar underneath instead of two.
1.54 — 2026-11-16 · A fresh coat of paint: the Bambu green-and-white theme is applied across the app — cleaner cards, buttons and tables; same buttons, same flow underneath.
1.53 — 2026-11-15 · On phones the exit hints no longer promise a left swipe — iOS Safari uses that gesture for its own back navigation, so the ✕ Close and ← Back buttons are the stated way out. On desktops the hints read exactly as before.
1.52 — 2026-11-15 · The pallet-photo guide now lives only in the pallet view, beside the photo buttons — the By Pallet tab opens straight on the table. Records loads just the past 3 months first, with a Load more button reaching further back; searching still covers every unit ever logged. The By Pallet table drops the Handler column — Opened by already shows the name. And the wide tables get a real slider bar underneath: drag it or scroll, the two stay in step, on desktop and phone alike.
1.51 — 2026-11-15 · Wider on desktop — the app now uses the full screen instead of a narrow strip down the middle. Tables that scroll sideways show a proper scrollbar, and on phones a small “scroll →” hint appears so nobody misses it. The pallet view’s Save button is back — everything still saves the moment you change it; Save is just a double-check. The photo guide’s examples are now a button right beside Photo / Upload. Back now carries its shortcuts on the button itself: ESC or swipe left.
1.50 — 2026-11-15 · One unit editor everywhere: the editor from Individual unit logging is now the only one — it opens right on top of whichever tab you're in. In a pallet, tapping a unit's Edit opens that same editor (photos and edit history included), and “Add a unit to this pallet” uses it too. A unit on a shipped pallet opens view-only, locked. The pallet view's separate mini-editor is gone.
1.49 — 2026-11-15 · Pallet view tidied: the photo guide moved in with the photo upload — right under the Photo / Upload buttons, still collapsed until tapped. The bottom action bar now sticks to the bottom of the screen while a pallet is open, so Complete / Back / Delete are always in reach. And "Save pallet" is gone: it only ever marked the pallet complete, so the button now says what it does — Complete pallet (Reopen pallet on a completed one). Everything else already saves the moment you change it.
1.48 — 2026-11-15 · By Pallet actions now match the pallet's state: In Progress pallets get Edit / Delete; Completed pallets get Reopen, which brings them back to In Progress (no more Delete on a completed pallet); shipped pallets stay locked, view-only. In the pallet view, the big label's number now sits on one straight line — prefix, −, number, + — with a small note under it: changes save automatically.
1.47 — 2026-11-15 · By Pallet now opens on every pallet — the In Progress / Completed / Shipped and Nevada / Illinois tags are gone, and every column header carries a spreadsheet-style filter (the small funnel) next to its sort. A new Handler column shows who last touched each pallet. In the pallet view: the photo guide sits at the top, collapsed; the pallet number is edited right on the big label — tap the number or use − / + and it saves instantly, no Save button; and every unit row always shows its red ✕ — the Remove / Done button is gone. ESC or a left swipe now closes the pallet view and the camera too.
1.46 — 2026-11-15 · By Pallet search is far more forgiving: dashes and spaces don't matter (0313 finds NV-03-13), and it also searches unit serial numbers, who opened the pallet, its truckload and what's on it.
1.45 — 2026-11-15 · The pallet photo examples moved to the top of By Pallet, collapsed — tap "Show examples" to open them.
1.44 — 2026-11-15 · By Pallet is one table now — every pallet in a single sortable list, with tags for In Progress / Completed / Shipped and Nevada / Illinois, a search box, and Open / Delete on each row. The pallet workspace is unchanged.
1.43 — 2026-11-15 · The Single units / Combo choice is now a big centered toggle pill — tap the side you want; the chosen side fills green. The whole Batch log card is squeezed down too — one-line header, one photo row, one-line model chips, slimmer boxes — so the empty card fits one screen.
1.42 — 2026-11-15 · The Single printer / Combo choice in Scanner / manual entry is now one toggle switch — “Single printer” on the left, “Combo” on the right; flip the switch to change. It works exactly as before otherwise. The whole Scanner / manual section is tightened too — smaller model tiles, closer spacing — so the full flow fits one screen.
1.41 — 2026-11-15 · Scanner / manual entry is rebuilt as one flow: tap a model, choose Single printer or Combo, put serials straight into the Serial # box (scanner, typing or paste), then “Add all these N serial numbers” — Reset clears just the box, and the card’s one Log all (N) button logs the batch. Box SN and Other label info are no longer displayed anywhere — Records shows an EAN column where Box SN was — while the values stay stored on each record. Exits are labeled: the expanded record, the edit card, the sync queue and the access-code pop-up now carry a small “ESC or swipe left to close” hint (the pop-up: “to cancel”), the expanded record gains a ✕ Close button, and swipe-left closes all four on touch screens.
1.40 — 2026-11-15 · The app’s home is bbl-repackaging.greatdealsnv.com again — the bbl-ops address now forwards here. Records rows are strictly one line tall (tap still unfolds, a second tap still opens the unit). The Action column gains checkboxes: select units to assign them to a pallet, take them off a pallet, bulk-edit model / condition, or re-read their photos with AI — values a person corrected by hand are kept, never overwritten. The photos ZIP button now appears only when a unit has 2 or more photos. And a unit on a finished pallet now carries a small black badge next to its pallet pill — 3/16 — its position among that pallet’s units of the same model.
1.39 — 2026-11-15 · The house-standard round. Write actions now ask for the access code in a pop-up and finish themselves once the code checks out — no sign-in detour, no redoing the action. Records: the Edit action moved to the front of the table, the summary counts and a new collapsed Insights drawer (one bar chart, one pie) act as filters, one row unfolds at a time and a second tap opens the unit, ESC closes pop-ups, a Refresh button joins the updated stamp, and each unit's photos can be downloaded as one ZIP file. The patch log gains a 💡 Request a feature box at the top, and public manifest links gain a 中文 / EN toggle.
1.38 — 2026-11-14 · Records table, two fixes. Serial numbers were invisible in the open (no-code) view — they now show for everyone, and tapping one still opens the unit for signed-in staff. The Date column now sorts by the real logged date instead of record order, so the list is truly newest-first.
1.37 — 2026-11-14 · Records is a full table; Bambu Service has moved out. The unit records are now a proper table — photo, model, serial, box SN, condition, pallet, truckload, logged by, date — with clickable headers to sort, a row tap for the unit's full detail, and search by the last 4 of a serial. The Bambu Service area is removed from this portal (it gets its own home next); every service record stays saved, untouched.
1.36 — 2026-11-11 · Open-view masking, completed. The viewer masking that blanks street / phone / email fields now also scrubs email addresses written inside free-text fields (intake notes, repair notes, history) and blanks the receipt-email status, so a customer email cannot reach an unauthenticated viewer through prose. Access pattern re-audited end to end against the master standard: codes are verified only by Team Hub access-verify (no local copies anywhere), every write returns 401 without a session, and viewing needs no code.
1.35 — 2026-11-11 · AI is an accelerator, never a gate. Full audit of the receiving save path against one rule: staff can always log by hand. Saving never waited on a read, a classification or an identification — verified — and now tagging doesn't either: a photo can be tagged the moment it lands, a tag set by hand always wins over a late AI result, a crashed read settles the photo as a plain parcel shot instead of leaving it stuck on “reading…”, and a photo file the phone can't decode no longer jams the rest of the batch. The instant match stays the best case; the hand path is guaranteed.
1.34 — 2026-11-10 · MATCH FOUND, unmissable. The checklist ✓s only ever meant “read” — so a match gets its own signal: a solid-green ✓ MATCH FOUND banner (ticket # · customer · which key matched) that springs in with a soft two-note chime the first time a ticket is identified, in a reserved slot so the form never jumps. Received records that linked an existing ticket now wear a small “✓ Linked” chip in the list.
1.33 — 2026-11-10 · Near-match suggestions. The green ✓ stays exact-only — but a scrambled key no longer fails silently. If the tracking # or serial on the form is a few characters off a record on file, an amber line offers the closest record with its on-file value; tapping it corrects the field and links the ticket, and the row then earns its green ✓ the honest way.
1.32 — 2026-11-10 · Instant tags, identify by any key, and a real QR decoder. Three fixes from the floor. 1) Tapping a photo’s kind now sticks instantly — the tag, the lit-green button and the checklist update on the tap itself; the fresh read just fills in whenever it lands, instead of holding the tag hostage. 2) A parcel now identifies its ticket by ANY key value — ticket #, serial, or the tracking # on the inbound label: the matching field gets a green ✓ → ticket #, the “✓ Matches Bambu portal record” line says which key matched, and saving links that ticket (stamping “matched by …” in its history) without ever pushing its status backwards. 3) Stickers are decoded, not guessed — a bundled QR decoder (jsQR, loaded only when needed) reads the code itself: full frame, then enlarged center and corner crops, before the AI ever looks at the printed digits. If even that fails, the sheet says so plainly.
1.31 — 2026-11-10 · A little celebration when a portal match lands. When a receiving save matches a waiting Bambu portal record, the result banner springs in with a soft green ring, and the Save button briefly reads “✓ Matched to …” before the form moves on. The green “✓ Matches Bambu portal record” line also gives one gentle pulse the first time it appears for a ticket. Transforms and shadows only — nothing shifts layout — and for anyone who prefers reduced motion, everything simply appears.
1.28 — 2026-11-10 · The tag sheet floats like it should. The whole photo thumbnail is now the tap target, not just its tag chip. And the sheet dismisses the way sheets should: tap anywhere outside it and it goes away, no action taken. With that in place the Close button is gone too — the sheet now ends with a single row: Remove photo.
1.27 — 2026-11-10 · The photo sheet, simplified. Fewer buttons, one gesture. The sheet is now just the three kind tags, the read result under them, and Remove / Close as the last row — nothing below them. The separate ↻ Read again button is gone: tapping any kind tag — including the one already lit — is the re-read; it always runs a fresh read, never the cached one. The lit tag (green) shows the kind the photo carries now, and it stays tappable.
1.30 — 2026-11-10 · Fix: ticket delete. In 1.29 the ticket-delete route sat above the line that defines its path match, so deleting a ticket answered “no route”. It now sits under it — ticket delete works (linked receiving records keep their rows, unlinked, ticket # kept as text). The receiving save response also returns the record’s full history, receipt-email entry included.
1.29 — 2026-11-10 · Delete buttons + an automatic receipt email. Every receiving record and every ticket now carries a quiet Delete this record at the bottom — for redoing test records without help. Deleting a receiving record removes its photos too; when its ticket came from Bambu (it has a ticket # or a portal message) the ticket stays and only the parcel record goes, and when the ticket was pulled from that very parcel and has no Bambu # yet, it goes with it — the confirm message says which case you’re in before anything is deleted. Deleting a ticket leaves its receiving records in place, unlinked, with the ticket # kept as text. And receiving now emails the sender a confirmation automatically: “We received your return”, the checked-in date, the ticket #, the tracking confirmed as delivered — signed Torque. The outcome is written on the record itself: sent, no email on file, or waiting on the Resend key.
1.26 — 2026-11-10 · Portal Records — Bambu’s incoming tickets get their own tab. First button in Bambu Service: every ticket Bambu has opened that hasn’t reached us yet (refreshed by the nightly preload) — ticket #, customer, model · serial, the issue, Bambu’s latest word with its date, and how long it has been waiting. Tap one to open it. Receiving Logging now matches against these records: when a label’s REF # or an SN sticker’s serial belongs to a waiting portal record, a green “✓ Matches Bambu portal record …” line appears before you save; the save then links that ticket — no duplicate — and the result reads “Matched portal record ✓”. Serial matching only ever touches waiting records; a ticket already received is never stolen by a later parcel. If the reads fail, a quiet picker under the summary — “pick the portal record it belongs to” — chooses the record by hand.
1.25 — 2026-11-10 · Photo fixes from the first live parcel test. Tracking now reads perfectly, and the rest of the receiving read is hardened four ways. 1) Tapping a pool photo opens a small sheet — retag it as label / sticker / parcel, ↻ Read again, or remove it; retagging to label or sticker runs a fresh read (no more replaying a cached empty read and wondering why nothing happens). 2) Two label photos now merge field by field — the first read with a good value for each field wins, so one upside-down shot can’t lose the sender the other shot read fine. 3) A sticker the AI can’t read gets one retry on a zoomed-in center crop, and phones that support it decode the QR code directly — the exact serial, no AI involved. 4) When a label gives tracking but no sender, the checklist now says so and points at Read again.
1.24 — 2026-11-10 · Ready for the nightly Bambu preload. Ticket Updates now carries Bambu’s side of the conversation: two new fields on every ticket hold the latest message from Bambu’s support thread and when it arrived — a nightly job fills them in from Bambu’s ticket emails, nothing to type by hand. When a ticket has one, the What’s going on panel gains a “Bambu’s latest” line, and the full message sits in a quiet block right under the panel. Receiving still matches a preloaded ticket by its Bambu ticket number — the parcel links to the same ticket, no duplicate is created.
1.23 — 2026-11-10 · Find a ticket by photo. Bambu talks about units by serial number, and the serial lives on a QR sticker nobody can read by eye — so Ticket Updates now opens with 📷 Find by sticker photo: shoot the sticker and the app gets the serial — straight from the QR code where the phone supports it, from the AI read everywhere else — and opens that unit’s ticket. No ticket yet means the unit hasn’t been received; the app says so and offers the one-tap jump to Receiving Logging. If several tickets share a serial, it lists them for a tap. Every ticket also opens with a short What’s going on panel at the top: where it stands in plain words, the issue, and the one next action — worked out from the ticket and its linked receiving records, nothing generated.
1.22 — 2026-11-10 · Sharper eyes for the photo reads. The reads now run on the big vision model (the small one stays as backup), and the label reader knows FROM from TO — our own warehouse address can never land in the sender fields again; if a label was photographed upside down, the app turns it around and reads it once more. Tracking numbers are checked against the real carrier patterns (a 5-digit ZIP is not a tracking number). No more guessing: a shipping label never names the printer — the model comes only from the SN sticker's serial, and a serial that matches no known Bambu pattern is left blank instead of invented. The weight printed on the label (ACTWGT) beats the model weight table, and never overwrites a weight typed by hand. Also fixed: the model suggestion list on the dark theme is a dark box with readable rows now.
1.21 — 2026-11-10 · Open view — the portal is free to view, no code to look; the code is asked only when you change something. Street, phone and email stay hidden until a code is entered.
1.20 — 2026-11-10 · Receiving, decluttered: the form opens nearly empty — photos first, nothing else. As the reads land, a short “What I read” list appears (tap any line to fix just that line), and the checklist asks inline for the few things the photos did not show. Email, phone, ticket # and notes tuck behind one “Details” line; Source and Item type are small chips now, and Carrier is a type-ahead answer field instead of a dropdown. Ticket Updates lost its row of filter chips: one working pile with plain state words (Coming in · Received · In repair · Shipped back), and finished tickets wait behind a single “Completed (N)” button. The three service buttons now fit the phone screen, and your name and store sit on their own clean line in the header.
1.19 — 2026-11-10 · Offline mode. The app shell now loads with no signal (a small service worker; online, pages still come fresh from the network first), and a pill in the header shows the state: ● Online / ● Offline · N queued / Syncing… / ⚠ N need attention — tap it for the queue sheet. Work queues itself in the browser and syncs in order when the connection returns: unit batches and pallet scans are saved whole and replayed (duplicates still merge, never double-log), Daily Receiving saves as an intent (its draft hands over to the queue), and small edits to existing records — unit/pallet/ticket updates, completes, deletes — queue as simple requests. The main lists fall back to their last copy offline, with a bar saying how old it is. Money never queues: label buys/voids, emails and share links stop with a clear "needs a connection" message. An item the server rejects waits in the queue sheet with the server's reason until it is discarded.
1.18 — 2026-11-10 · The dark area is three buttons — Receiving Logging · Ticket Updates · Shipping Status. Receiving photos are ONE batch now: throw them all in (the camera keeps shooting, or upload many at once) and the app sorts each photo itself — shipping label, SN sticker, or parcel photo — and fills the form as it reads. A "Before you save" checklist shows the two photo quotas (Shipping label 1/1, SN sticker 1/1 — a filled row strikes through, settles, and tucks away) plus what is still missing, and the half-finished batch saves itself in the browser, so walking away and coming back loses nothing. Tickets are one thing: a ticket is initiated from the Bambu portal and pulled in at Daily Receiving — never filled in by hand; the repair is a stage of the same ticket (received → in repair → completed → returned), and our part (tech, diagnosis, status) is filled on it in Ticket Updates. Shipping labels got their own tab: pull a receiving record, Generate, Send email — the tracking and shipping status live there.
1.17 — 2026-11-10 · THE camera fix, at the root: the camera sheet lived inside the Individual unit logging tab's section — so from any other tab (a pallet, Daily Receiving) that section is hidden, and a hidden camera sheet can never show a picture even though the camera and flashlight start. That is why the flashlight came on with no preview, every time, everywhere except the logging tab itself. The camera sheet (and its hidden trigger) now live at page level, outside every tab, and if a preview ever fails to start the sheet says so on screen instead of sitting black.
1.16 — 2026-11-10 · Pallet workspace, two fixes. Opening a pallet no longer jumps down to the scan box — you land on the pallet itself, at the top. And the scan box is now a tall multi-scan area: scan serials one after another, or paste a whole list (one per line) and tap Add — it reports what was added, what was already here, and what sits on another pallet. (Version numbers now read 1.x — 0.115 was the last of the 0.x count.)
0.115 — 2026-11-10 · Bambu Service is real now. Daily Receiving is photo-first: the shipping label photo is read by AI and fills the sender, carrier, tracking and weight; the SN sticker photo fills the serial and model; a duplicate tracking number (or serial) is refused and points at the record already on file. Every receiving record carries a FedEx ship-back label panel (EasyPost): address verified before buying, Ground / Home Delivery / 2Day only (never overnight), with Email label and Void label buttons — buying switches on when the EasyPost key is added to the app. Bambu Tickets and Repair Tickets are full working lists with create forms, and the three tabs are linked: logging a receiving against a ticket marks that ticket Received, a receiving record can open its repair ticket, and every record jumps to its linked records.
0.114 — 2026-11-10 · New main address: bbl-ops.greatdealsnv.com — “ops” covers both Bambu teams under one roof. The old bbl-repackaging address now forwards to it (links already shared keep working).
0.113 — 2026-11-10 · The address follows the view: opening bbl-repackaging.greatdealsnv.com lands on Repackaging as always, and links can now point straight at an area and tab — ?area=service opens Bambu Service, ?tab=pallets opens By Pallet. As you move around, the address updates to where you are, so any view can be bookmarked or sent to a teammate.
0.112 — 2026-11-10 · Bambu Service wears a dark theme: switching to the service area turns the whole view dark (background, cards, menus, fields), and switching back to Repackaging restores the light theme. The two teams now look different at a glance, not just read different.
0.111 — 2026-11-10 · Two-row menu, both rows on top: row 1 switches between the two Bambu teams — Repackaging and Bambu Service — and row 2 shows that team's tabs. Repackaging keeps its five tabs; Bambu Service gets Daily Receiving · Bambu Tickets · Repair Tickets (new area — each tab's own workflow wires in next). Switching areas remembers where you left each one.
0.110 — 2026-11-10 · The By Pallet work list is now headed “In Progress” (was “Open pallets — work list”) — In Progress vs Completed pallets.
0.109 — 2026-11-10 · By Pallet calms down: entering the tab no longer auto-opens a pallet — you land on the list and open what you choose, and the open work list no longer has Minimize/Expand toggles to fight. The two lists now read differently at a glance: pallets still being built sit in bright green cards; Completed pallets sit in a grayed-out section underneath. Both lists sort by last modified, newest first, and every completed row carries a small completed date + time.
0.108 — 2026-11-10 · The Unfulfillable reason + damage-photo prompt now sit directly below the Condition tags (above the Build into a pallet box), so the reason reads as part of the Damaged choice it belongs to.
0.107 — 2026-11-10 · Damaged + Physical damage now demands photos OF the damage: picking that reason shows an on-screen prompt (close-ups of what's broken — smashed glass, cracks, dents — added in the same batch; photos with no sticker serial attach to the damaged unit as its damage photos), Log all refuses to log a physically damaged unit without at least one damage photo (nothing is logged or created first), and the server enforces the same rule (sticker + at least one damage photo) for any caller.
0.106 — 2026-11-10 · The Unfulfillable reason list (shown after tapping Damaged) no longer offers “Ugly labels” — an ugly label is its own condition, not a damage reason; the redundancy is gone. Reasons are now: Physical damage · Lack of packaging material · Other.
0.105 — 2026-11-10 · Units section header: the button now says “Add a unit to this pallet”, with a small Remove button snugly beside it — Remove opens a remove mode (a ✕ on each row takes that unit off the pallet; Done closes the mode), both hidden on locked pallets. Add units pool: every row now carries the amber UNASSIGNED pill (same tag as Records) so unassigned units are distinguished at a glance, and a unit logged today also carries a green “Added today” pill.
0.104 — 2026-11-10 · Pallet view rearranged on the batch-logging model — simple at rest, editing on demand. The unit list is a compact table again: one row per unit (condition dot · model · full serial, with condition / by / time on a quiet second line) and NO form fields or buttons in the resting view; tap a row's Edit and only that row opens its editor (fields, Save / Remove / Move, Full editor), one at a time. The top block is rebuilt: the label stays big, the NV / truckload / pallet key is one small line instead of three fragmenting columns, the photo is a small square strip with Photo / Upload beside it (the fixed-height text box that spilled over the buttons is gone), and Opened by + Edit pallet # share one quiet row. The explanation paragraphs under the scan box and the pool are removed.
0.103 — 2026-11-10 · Pallet view decluttered for phones (90% of use): the unit table is gone — its four fixed columns left the serial box a sliver wide and pushed Remove off the screen. Each unit is now its own card: model + serial on one line with the serial full-size, condition on its own full-width line, By + EAN tucked under, then one action row (Save · Remove · Move to…). The three big pallet buttons no longer float over the page — Save pallet / Back / Delete pallet sit in a plain dock at the very end of the pallet, and the note that was squeezed beside them sits above them. On phones the photo and label now sit side by side at the top instead of stacking full-height, and the long team note is desktop-only.
0.102 — 2026-11-10 · The pallet view round. (1) An opened, expanded pallet now stands apart from the list: in By Pallet it sits on a pale-green card with a green border and an EXPANDED tag, and the opened pallet workspace itself opens on a pale-green background instead of plain white. (2) Minimize is a real, visible button — a big Minimize at the top of every expanded pallet card and at the top of the opened pallet workspace, where it stays in view while you scroll; a minimized list card gets an Expand button to bring its contents back. (3) The pallet photo placeholder no longer says “No photo yet” — it tells you the shot: three sides of the pallet (front, side and top), with the label written on the top of the pallet and attached BEFORE the photo, so the label is on the pallet and readable in the shot; the guidance card on the Pallets page says the same. (4) The confusing “Model for scanned units” field above the scan box is GONE — the scan box now sits below the unit list, inside the Units card, as part of the list itself; a scanned unit lands in the list and its model is set in its own row. (5) Pallet-view model fields are model NAME only — no model numbers in the pallet view's unit rows or add pool — and the name list is complete, H2D Pro and H2D Pro Combo included.
0.101 — 2026-11-10 · Five things from the floor. (1) Records quick-select now picks TODAY: the button beside the Records title selects everything logged today (each unit on its own warehouse day), not just the last hour. (2) The batch Condition is three tap tags instead of a dropdown — Refurbishable · Ugly / damaged label · Damaged — and Refurbishable starts selected. (3) Records rows wear their pallet as a colored tag: every unit on a pallet shows the pallet number, and each pallet number gets its own far-apart color — neighbors jump (never two similar colors side by side) and every unit on the same pallet wears the same color. (4) By Pallet opens the LATEST open pallet automatically when you tap into the tab; completed pallets stay collapsed. (5) Delete lives on the lists now: any pallet can be deleted right from By Pallet, and any truckload right from Truckload view — deleting never deletes what is inside: a pallet's units go back to unassigned, and a truckload's pallets simply come off the load with their units still on them.
0.100 — 2026-11-10 · By Pallet, the way it should read: OPEN pallets are expanded right in the list — each one shows its contents (the same qty × model lines that go on the label) without opening it. COMPLETED pallets stay closed as one-line rows, each with its own Open button — tapping the row itself no longer opens anything. Above the completed list, location tabs (Nevada 89109 · Illinois 62002 · All) switch the list, and the tab you land on is your own store: Nevada staff open straight onto Nevada's completed pallets, Illinois staff onto Illinois'. (The owner lands on Nevada and can switch.) Also fixed along the way: the completed list now renders even when there are no open pallets.
0.99 — 2026-11-10 · One batch flow, nothing labelled single vs multiple: the punched model field is GONE — in the scanner section the model is chosen only by tapping a grid tile, and serials (scanned, typed or pasted) all land in the same batch, as few or as many as you add. Records now tags every unit with no pallet with a small amber UNASSIGNED pill so loose units stand out in the list and in search. Performance pass: startup no longer fetches the same pallet/truck lists twice — the duplicate eligible-pallets load is out, and Records reuses the pallet and truck lists the page already loaded instead of re-fetching them on every search keystroke.
0.98 — 2026-11-10 · The model tap-grid is now a fixed list, checked against Bambu's official lineup — no longer built from logged data (which dragged in sticker-read names and accessories). Three series only, short human names: A — A1, A1 mini · P — P1P, P1S, P2S · H — H2C, H2S, H2D, H2D Pro. Each chip carries a muted annotation: its handling weight (A1's 30 lb from the pricing sheet; the rest from Bambu's published package weights), and on the H series what the letter means — S single head, D dual head, C hotend swap.
0.97 — 2026-11-10 · Records search is live: the Search button is gone — type or scan into the field and the matches simply appear (a quarter-second after you stop typing). In its place a Clear button empties the field and brings the full in-house list back.
0.96 — 2026-11-10 · Records is in-house only now: the Shipped filter (All / Shipped out / In house) is gone — the list simply never shows units that already shipped out, and the Truckload filter lists only the load still being built, not shipped loads. Shipped history lives in the Manifest and Truckload views, where it belongs. Filters left: search, pallet, truckload.
0.95 — 2026-11-10 · Records rows now lead with when the unit was added — 'just now', '5 min ago', up to an hour, then the plain date and time — and the labels keep aging while the page sits open. A 'Select last hour' button beside the Records title ticks everything logged in the past hour at once, so the units you just added can be batch-moved to a pallet in one go.
0.94 — 2026-11-10 · Scan/manual simplified to one flow: there is no separate single-unit entry — a single unit is just a batch of one, same steps. The model is picked from a tap grid grouped by series (A · P · H · X, whole units only, no scrolling through a list), and the serial box no longer needs an Enter key: the scanner's line break adds the unit, the + Add button adds it, and the keyboard's Next commits it too.
0.93 — 2026-11-10 · Punch just the model: the hand-entry Model field now offers base models only (P1S, A1, H2D…), and the Combo suffix is added individually — every batch row carries a Combo pill under its model; tap it and that unit alone becomes P1S Combo (green), tap again to take it off. No typing suffixes, no separate Combo models to hunt for.
0.92 — 2026-11-10 · Scan/manual shows the MODEL, not the model number: hand-entered rows now pair name and number the moment they're created (before, pairing waited until Log all, so a punched number sat in the Model column); the Model field itself settles on the name when a number is punched or picked, and the autocomplete lists names as the entries — numbers still match when typed, shown as the small alternate, never as the value.
0.91 — 2026-11-10 · Model fields get a real autocomplete: iOS Safari never shows a dropdown for the built-in suggestion list (it hides the matches in the keyboard strip), so every Model field now opens our own forgiving dropdown — type P or PF001 and tap the match, name and number shown together. Picking one pairs name and number on the row immediately. Same dropdown on the batch table, the hand-entry Model field, pallet units and the record editor.
0.90 — 2026-11-10 · Model vs model number, separated for good: the sticker carries both — the human model name (P1S) and the model number by the barcode (PF001-U). The reader now gets the code-to-name map in its instructions so the name survives a missed corner print, and the moment a read lands, the table pairs the two from the known map: the name always sits in the Model box, the number always underneath. A code can no longer pose as the model.
0.89 — 2026-11-10 · Camera proof-of-shot: the count pill is out of the button bar (four-across was pushing Done off the right edge — the bar is back to Capture · Flashlight · Done), and after every shot a small thumbnail of the photo just taken appears in the corner of the camera view with the batch count under it. Its red ✕ throws that last shot away if it was a bad take. So the shooter always sees proof the shot exists, what it captured, and how many are in.
0.88 — 2026-11-10 · The camera now counts out loud: in batch shooting a green pill beside Capture always shows how many shots are in the batch ('3 in batch · tap Done'), updating the instant each shot lands — including the auto-captures you never tapped for — instead of the count hiding in a status line that gets overwritten.
0.87 — 2026-11-10 · The real camera bug, found: the camera overlay had been sitting inside a hidden container since the logging form was rebuilt — the camera hardware started and the flashlight lit, but the overlay itself could never appear on screen, on any phone. The overlay now lives at page level where it can actually open, with the flashlight coming on as before. The button is renamed 'Take photo(s)'.
0.86 — 2026-11-10 · Upload buttons now go straight to the photo album: the file inputs listed a wildcard image type, which lets Android hand the pick to the generic Files/Documents app. They now name the exact photo types (JPEG, PNG, WebP, HEIC/HEIF, AVIF, GIF), which routes Android to the Photos/gallery picker and keeps iPhone on the photo library. Applies to batch Upload photos, the camera fallback, and the pallet photo upload.
0.85 — 2026-11-10 · Android camera fix: Take photo turned the flashlight on but the preview never appeared — the app was attaching the camera stream while the preview was still hidden, and Android Chrome then never starts the picture. The preview now opens FIRST, the stream is attached after it is visible, and the video is told to play explicitly (with one automatic retry a moment later if the first start did not take).
0.84 — 2026-11-09 · Four fixes from the floor. (1) The batch camera is now the app camera: tapping Take photo opens the camera INSIDE the page — the flashlight comes on by itself wherever the browser allows it, auto-capture fires when a sticker is steady (or tap Capture), each shot lands in the batch and the camera stays open for the next one — shoot a whole pallet of 20–30 without ever leaving the page, then tap Done and every shot starts reading at once. If a browser has no in-page camera, the button falls back to the phone camera as before. (2) Condition words: Reusable is now Refurbishable, and Ugly — set aside is now Ugly / damaged label — sticker to be replaced, everywhere the condition shows (stored values unchanged). (3) Records refreshes itself after EVERY Log all now (before, a run of only-duplicates skipped the refresh, so the list could look stale), and the Records title shows the time it last updated. (4) Records multi-select: tick the boxes on any rows (or the header box for the whole page), and a green bar moves them all to one pallet — or back to unassigned — in a single action; units on shipped truckloads stay locked and are counted in the result.
0.83 — 2026-11-09 · Android camera fix: the batch's Upload photos button uses the multi-photo gallery picker, and Android's version of that picker goes straight to files with no camera prompt (the iPhone picker offers one, Android's doesn't) — so Android techs had no way to shoot a sticker. There is now a dedicated 📷 Take photo button beside Upload photos: it opens the camera directly on every phone, each shot lands in the batch and starts reading immediately, and you tap it again for the next one — shots accumulate in the same batch up to the 30-photo cap. Scanner / manual moves to its own full-width row underneath.
0.82 — 2026-11-09 · Records actions column widened a touch (88 → 98 px) so the Move to… dropdown label shows in full instead of clipping to 'Move t…'.
0.81 — 2026-11-09 · Hand entry is unified — a scanner is just a keyboard, so there is no scanner mode and no typing mode anymore: one Model field serves everything entered by hand, one serial box takes a scan or typed keys identically (Enter adds it), and one open box takes a whole pile — 10+ serials pasted or typed, one submit, all taking the model above. Shipped pallets are now visible as shipped: in the Build-into-a-pallet picker they appear greyed on a tinted background ('🚚 shipped on NV-02', not selectable), and in Completed pallets the shipped ones carry a grey-blue background with their truck tag.
0.80 — 2026-11-09 · iPhone layout fix: the Records list was a plain auto-sized table whose six columns (serials, names, the Move-to dropdown) forced it wider than a phone screen, which stretched the WHOLE page sideways — header, tabs and cards all shifted with dead space at the right. Records now uses the same fitted table as the rest of the app: model + condition on one line, the serial under it (allowed to wrap), pallet · truckload · logged-by as a small muted line, and Edit / Move-to in a fixed right column. Nothing about the data or the buttons changed.
0.79 — 2026-11-09 · Four refinements to batch logging. (1) Duplicates merge by serial: the serial is the unit's identifier — when a batch hits a serial already in the records, the run fills ONLY the blanks on the existing record (Box SN, EAN, model, notes, and pallet if it has none) and never overwrites; the result line names them as 'already submitted — merged', and the unit appears in Logged-just-now tagged the same way. (2) 'Build into a pallet' — the pallet picker is now its own green box under Condition, and the Log all button shows the target (Log all (4) → NV-03-15), so logging + building into a pallet reads as the single action it is. (3) Scanner mode is button-light: the type/paste extras moved behind 'Type serials instead', so scanning is just model + scan after scan, no taps in between. (4) Picking photos closes the manual panel, drops the keyboard, and scrolls the table into view so the new rows are visible instantly.
0.78 — 2026-11-09 · Uploading and reading now report as two separate statuses in the progress panel: ⬆ Uploading photos… n/N (ticking to ✓ Photos uploaded) on its own bar, then the CMD line's Reading stickers… n/N on the second bar — so a slow moment shows exactly which stage it is in.
0.77 — 2026-11-09 · Photo uploads now show themselves working: picked photos land in the table instantly as rows marked “reading the sticker…”, a dark progress bar in the card (and the floating pill) runs the CMD model line with a live count — reading 2/4 · serial — as each sticker is read, and a hung read times out at 45 seconds instead of stalling the batch.
0.76 — 2026-11-09 · The logging page is redesigned to open calm: a short title, one line of guidance, a bold entry count with the two buttons on their own full-width row — no more text crushed into a sliver beside the buttons — then the table, with Condition and Pallet side by side. The fallback Model field moved into the Scanner / manual panel, and the pallet header strip got the same shortening.
0.75 — 2026-11-09 · Scanner mode: the manual paths now hide behind a ⌨️ Scanner / manual button, so the logging page opens clean — just Upload photos and the table. Inside: punch the model once (name or code), then every physical-scanner scan lands in the table with that model; switch the model whenever the pile changes. Type/paste and blank rows live in the same panel.
0.74 — 2026-11-09 · Restored the model autocomplete list that lived inside the removed Single unit form — its absence was silently stopping startup right after sign-in, which is why Records and the batch pallet dropdown never auto-loaded. Startup is also hardened so a missing helper element can never stop it again.
0.73 — 2026-11-09 · The batch pallet dropdown now loads on its own track at startup (it could previously be starved if the pallet list fetch hiccuped first), and the pallet table's Condition column is wide enough to show “Reusable” in full.
0.72 — 2026-11-09 · The tables are rebuilt to the pallet table's pattern, fitted to a phone screen: fixed columns that never overflow — Photo · Serial (Box SN and EAN tucked under it) · Model · actions. The batch card gets the pallet-style header strip (entry count · + Add a row · Upload photos), blank rows can be added and typed into, and the logged-just-now table matches. The pallet table itself gets the same fit — By and EAN move under the serial. Also fixed: the pallet Photo button's camera fallback and a faster startup.
0.71 — 2026-11-09 · Hotfix: removing the Single unit form left one stray wiring line pointing at the deleted condition buttons, which stopped the app's startup script — Records, the batch table's first paint and the pallet photo button all froze. The line is out; everything verified live again.
0.70 — 2026-11-09 · The Single unit form is removed. Batch log is how units get logged now — the logging tab is tables, not forms: the batch table on top, Records below. The camera kit survives out of sight because pallet photos still use it, and its fallback now opens the pallet's own upload.
0.69 — 2026-11-09 · The batch table is always on the card now — headers showing from the moment the tab opens, with the run settings underneath it. Upload one sticker photo and one row appears; upload thirty and the table grows to thirty rows as they are read. The batch no longer looks like a form with a table hidden behind an upload.
0.68 — 2026-11-09 · After Log all, the run lands in a “Logged just now” table inside the batch card — the same editable table as the pallet workspace (serial, model, condition, box SN, EAN, per-row Save) — so a batch can be checked and fixed on the spot instead of hunting through Records.
0.67 — 2026-11-09 · Batch serial entry is paste-proof now: the serials box splits on newlines, commas, semicolons, tabs and spaces alike, so a list copied from a spreadsheet, a chat or a scanner lands as separate entries instead of one merged line.
0.66 — 2026-11-09 · The batch list is now a live table — as each sticker photo is read, its row lands in the table immediately (photo, serial, model, box SN, EAN), every cell editable, exactly like the pallet workspace table. The AI reading progress now floats in a pill at the top of the screen while reads run, for both batch and single reads. The old capture form is renamed Single unit and sits below the batch table.
0.65 — 2026-11-09 · Batch log moved to the TOP of the Individual unit logging tab and labeled for what it does — “upload 20–30 sticker photos at once” — so every technician sees the fast path first: shoot all the stickers, upload them together, the computer reads them all, one tap logs the run.
0.64 — 2026-11-09 · Removed the Log-a-unit strip from the top of By Pallet — it duplicated what the pallet workspace already does better. Logging into a pallet now happens inside the pallet: open it, scan into the Add units card, or use the units table. The By Pallet tab opens straight onto the work list.
0.63 — 2026-11-09 · Batch log is here: photograph a whole run of units (camera app is fine), then pick up to 30 sticker photos at once — the computer reads every sticker (serial, EAN, model) and builds one entry per photo, logged in a single tap with one shared condition and pallet. Typed or scanned serials can join the same batch. On Android, Take photo now falls back to the phone's own camera when the in-app camera is unavailable, and single-unit uploads keep the order they were picked in.
0.62 — 2026-11-09 · Fixed the Individual unit logging tab rendering blank: when the edit box moved to the top of the tab, its wrapper was left open and quietly swallowed the Capture form, Records and session list into the hidden edit card. The edit card now wraps only its own fields. No data was ever lost — all 1,559 units were in the database the whole time.
0.61 — 2026-11-09 · Every unit now shows its full chain in Records — pallet AND truckload (or “no truckload yet”) — with a truckload filter on top and a Move-to picker right on every row, so rearranging units between unassigned, pallets and truckloads takes two taps from anywhere. The September Alton pull-back is also corrected: the P2S Combo and A1 pallets Bambu's group flagged on Sep 11 are back in Alton (IL-03) and untagged.
0.60 — 2026-11-09 · One database, two equally easy doors. The logging form's pallet picker now leads with quick chips — Unassigned plus the two most recent pallets — and expands to every pallet that is NOT on a shipped truckload. Inside a pallet, every unit row has a Move-to picker (any eligible pallet or back to unassigned), and the By Pallet tab gets its own Log-a-unit strip. Anything sitting on a shipped truckload is locked: the server refuses to move it, and the pallet workspace shows the lock.
0.59 — 2026-11-09 · Shipped tagging + Bambu documents + export/email. Every unit matched to a Bambu receiving doc or a shipment export is now tagged with the truckload it shipped on (NV-02: 415 units, IL-02: 256) — the tag shows in Records (with a Shipped filter) and inside pallets. The Manifest tab shows each load's Bambu documents (receiving A6-RV-TZH01-260908-0005 + the September exports) and gains an Export for Bambu block in the standard format (---托盘--- pallets, then ---型号--- models) with Copy, SN-list download, and an Email button. The September Alton load is now IL-02 shipped (25 pallets proven by serials); the pallets still in Alton moved to IL-03.
0.58 — 2026-11-09 · On the Individual unit logging tab, the Records list now sits directly under the capture form — before the “Logged by you this session” box — so the units are the first thing you see when you open the tab, not buried at the bottom.
0.57 — 2026-11-09 · Settled by the shop's own cadence — never more than one truckload a month: the Sep 4 submission was the Aug 30 load logged a second time, so Las Vegas has shipped NV-01 (July) and NV-02 (August), and the load now building is renumbered NV-03. The next one, when it ships, becomes NV-04.
0.56 — 2026-11-09 · The truckload history is reconciled and loaded: NV-01 (shipped Jul 8) and NV-02 (shipped Aug 30) for Las Vegas, IL-01 (shipped Jul 26) for Alton, and IL-02 opened as Alton's current load — with the historical pallets attached to the load they belong to (24 pallets on NV-02, Alton's 49 later pallets on IL-02, the 13 newest Vegas pallets on the current load). The old truckload form's Sep 4 Vegas submission is NOT counted as a separate load: zero units and zero pallets were logged Aug 31–Sep 4 and its manifest is a near-copy of Aug 30's — it is treated as the Aug 30 load logged twice, pending the owner's final call.
0.55 — 2026-11-09 · The unit editor now opens at the TOP of the Individual unit logging tab instead of the bottom — tapping Edit on any record brings the edit box up top, no more scrolling all the way down to save.
0.54 — 2026-11-09 · The Manifest tab gains the export view the team used to build in the Google Sheets Apps Script: pick a location and a date range and Generate Summary — total pallets matched, total item volume, the plain serial list with a Copy button, and the pallet configurations grouped by identical contents (“2 identical pallets of P1S @ 12 units per pallet”). The truckload view is still there as the other mode.
0.53 — 2026-11-09 · The old pallet submissions are being migrated in. Historical pallets whose old form recorded contents as text only (no serials pasted) now show those declared lines on their label and in the Manifest, clearly captioned as coming from the old form's text. Any pallet carrying a migration note — a possible double-count or mislabel, marked for review — shows that note in the workspace and in the Manifest.
0.52 — 2026-11-09 · The menu is reorganized the way the work actually flows: Individual unit logging (the Records search & edit now live inside it, under the logging form) · By Pallet · Truckload view · Daily Progress · Manifest — a new tab, the manufacturer's view: pick a truckload and see the totals Bambu Lab cares about (pallets built, total units, how many SKUs, the quantity of each) and the full pallet-by-pallet manifest, all counted live from the units.
0.51 — 2026-11-09 · The label block is centered again on PC too — box, annotation, buttons and the team note all sit centered in their column, so the whole thing reads like an actual label instead of left-aligned form text.
0.50 — 2026-11-09 · A note for the team now sits under the pallet label: the rest is auto-loaded — the lines under the pallet number come from the units on the pallet, so there is nothing to fill in by hand.
0.49 — 2026-11-09 · The pallet label is no longer an open field — there is nothing to type into. The label is computed, always: the pallet number on the first line, then one line per model counted live from the units on the pallet (1x P1S), and it stays that way until the pallet is marked complete. The free-text label editor and every hand-written override are gone (including from the truckload manifest, which now also counts from the units). The pallet number itself still changes only through Edit pallet #, with the format locked.
0.48 — 2026-11-09 · A declutter + clean-up round. The name sprawl is gone: Opened by and each unit's Logged by are now single dropdowns (changing the name still needs that person's access code). The button reads Edit Pallet Label, and the editor edits the WHOLE label — pallet number on the first line, then the quantity x model lines. Units are edited right in their table rows — every field is an input, with a Save button per row; the big expanding editor box is gone, and a + Add a row button drops a blank row at the top for adding a unit by hand with all its fields. On PC the pallet top composes as one header: photo left, label block left-aligned beside it. Clean-up: dead styles and handlers from retired features were stripped — the page stays a single small file.
0.47 — 2026-11-09 · A pallet photo can be removed: a Remove photo button sits with the Photo / Upload buttons whenever a photo is set — it clears the photo and the pallet goes back to “No photo yet”, ready for the right shot. (Uploading a new photo still replaces the old one.)
0.46 — 2026-11-09 · Pallet workspace layout, PC vs phone: on a wide screen the pallet photo sits on the LEFT and the label on the RIGHT, side by side; on a phone they stack, photo on top. Buttons behave: the quiet buttons (Cancel, Edit label, Edit pallet #) are actually quiet now — only the action that commits is green. The units table shows every field all the time (the EAN toggle is gone), and each row in the add-units pool now shows the full picture — model, serial, EAN, condition, when it was logged and by who.
0.45 — 2026-11-09 · The pallet label now reads exactly like the real thing, like the labels in the past submissions: inside the dashed box, the pallet number on its own line (NV-04-01), then one line per model as 12x P1S — nothing else in the box. The explanation of the number's three parts moved below the box as the annotation, the Edit label / Edit pallet # buttons sit under that, and the guidance photo no longer appears inside a pallet — it lives on the Pallets page only.
0.44 — 2026-11-09 · The pallet workspace is rearranged to match the rest of the app: everything now sits in the same centered column and proper cards — pallet card (photo, identifier, label, opened-by) on top, then an Add units card, a Units card and a pool card. The empty photo placeholder centers properly instead of sticking to the left edge, the name chips stay inside the card, and nothing sprawls across a wide PC screen anymore.
0.43 — 2026-11-09 · The + New pallet button moved out of the Open pallets work-list card — it now sits on its own below the card, not inside the box.
0.42 — 2026-11-09 · The label box sits right under the pallet identifier, and its caption is one plain sentence now: “Write this on the label and attach this label to the pallet.” The editing stays behind the Edit label button. The pallet number no longer looks editable — it reads as part of the identifier, and a small Edit pallet # button reveals the number editor only when someone actually needs it.
0.41 — 2026-11-09 · Humble numbering from here on. The pallet photo now sits at the very top of the workspace — above the identifier number and its editor — sized for the vertical photos the team actually takes, smaller on phones. The name chips come straight from the POS roster (plus Austin Wohlert in Alton) instead of every name ever typed into the old forms. And the units on a pallet are a condensed table now — model, serial, condition, who logged it — tap a row to open its editor; the box serial never clutters the list, and a toggle reveals the optional fields like EAN. The floating bar now holds all three exits with plain meanings — ✓ Save pallet (finished, off the open list), ← Back (leaves the pallet open; every change already saved itself), Delete pallet — nothing buried at the bottom of the page anymore.
v41 — 2026-11-09 · The window beeps now — a real two-tone beep on every successful log and scan-add, a low buzz on a duplicate (the scanner gun still has its own beep). Daily Progress drops the GU conversion — units only. Pallet view: unit rows open already editable and save as you change them; the pallet photo moves up beside the big identifier number; the add-units pool shows just the 50 most recent, each with its logged date and time. And the credit is protected: Opened by / Logged by are tap-only name chips (Full Name (II)) — moving a name to someone else needs that person’s access code.
v40 — 2026-11-09 · The AI read status talks like a terminal now: a black monospace chip names the exact model doing the reading — meta/llama-3.2-11b-vision-instruct — while it works and when it finishes, so the whole team can see which model Cloudflare is running.
v39 — 2026-11-09 · Mixed-SKU pallets are first-class now. The label is fully editable: Edit label on the sticker lets you rewrite the lines by hand (one line per model) — that exact text is what the truckload manifest shows for the pallet — and Use auto count restores the computed lines. The scan model field is optional and says so: on a mixed pallet leave it blank and each unit keeps its own model. And who submitted is editable everywhere: a unit's Logged by in both editors, and the pallet's Opened by right in the workspace.
v38 — 2026-11-09 · New Daily Progress tab, sitting right before Records: the old Counts view grows into the team's own progress board — units per team member and per day over the last 7, 14 or 30 days, sortable (most units · most consistent · name A–Z), with animated consistency meters and day-by-day chart bars so steady work shows at a glance. Records stays the lookup tool for the Bambu team, and the “units logged today — 0.5 GU each” table still lives at the bottom of Daily Progress.
v38 — 2026-11-09 · The pallet workspace top now carries a LABEL: a dashed sticker under the identifier that says exactly what to handwrite — the model lines, 12 × P1S — with a soft green pulse, and it pops whenever a unit is added or removed. The old mid-page “Write on the pallet” section is gone (it repeated the top). Units on the pallet are editable in place: Edit opens the unit's fields inside its row — model by its human-readable name (the internal code fills itself in), serial number, box SN, condition — and saving never leaves the pallet.
v37 — 2026-11-09 · The moment Damaged — unfulfillable is picked on the logging form, the photo rule shows up front in a red note: box photos are required — more than the serial sticker, the whole box and the damage, several angles. Also: the good pallet-photo example is now the perfect H2D Pro Combo corner shot (two sides, label big, full height).
v36 — 2026-11-09 · Pallet workspace: scanning is back — a beep adds a unit straight into the open pallet (a serial that is already logged gets moved in, never duplicated), and every unit row now has Edit next to Remove, opening the full unit editor. The Find box is gone — searching lives in Records. Logging: a unit can carry multiple photos — the first is the serial sticker the computer reads, the rest show the box; camera and upload both keep adding, and each photo can be removed before logging. A damaged / unfulfillable unit can no longer be logged without at least one photo of the box — the form stops you, and the server refuses it too. Extra photos show in the Records editor.
v35 — 2026-11-09 · The pallet-number editor now sits in its own block directly BELOW the big pallet identifier and its color key — identifier first, editing underneath, never above. The app also tells browsers not to cache the page, so the team always gets the newest version instead of a stale copy.
v34 — 2026-11-09 · Correction to the hero: the identifier itself is ALL BLACK — the colors live only in the explanation. The three explanations now sit side by side like three columns under the number (location · lifetime truckload · pallet), on phone and PC alike, and the pallet-# editor (tiny box, −/+ steppers, Save) moved up under them — the edit lives with the identifier, not at the bottom of the page.
v33 — 2026-11-09 · A small muted caption — PALLET IDENTIFIER NUMBER — sits right above the huge identifier in the pallet workspace, so the team knows exactly what that big number is.
v32 — 2026-11-09 · No more scanning units INTO a pallet — that bypassed logging and its duplicate checks. Inside a pallet you now ADD from the pool of units already logged and not yet on a pallet (tap to add), and the only scan left is FIND: scan a serial to learn where that unit is — on this pallet (it lights up), on another pallet, or not logged yet.
v31 — 2026-11-09 · The pallet identifier is the hero now: HUGE and centered at the very top of the pallet workspace, each of its three parts in its own muted color with the matching explanation right underneath — like the filament code key. And the tabs follow the work: Logging · Pallets · Trucks · Records · Counts (Records is the search-and-fix tool, Counts is totals only — not duplicates).
v30 — 2026-11-09 · The manual pallet-label form is gone — it was redundant. The pallet has ONE identifier (NV-04-02) and the workspace now shows a “Write on the pallet” line computed from the scanned units: the identifier, the quantity, and the models with counts. Nothing to type, no Save label. The truckload manifest derives each pallet’s models from its units the same way.
v29 — 2026-11-09 · Inside the pallet workspace, the pallet # is now a tiny box with − and + steppers instead of a screen-wide field, and a small muted-green line right under the number teaches the format: NV = the location, 04 = the lifetime truckload count, the last part = the pallet in that load.
v28 — 2026-11-09 · The format is final and locked: NV-04-01 — state (NV/IL), then the lifetime truckload count, then the pallet in that load. No year anymore. Nobody can change the format: a pallet number edit can only change the last part (the pallet #), new pallets always take the next number automatically, and the truckload count goes up only when a truckload is submitted. The Pallets page now carries the format annotation at the top of the work list.
v27 — 2026-11-09 · The truckload count is a LIFETIME count now — it never resets at the new year (the year in the number is just the year the load was made). The Trucks page teaches the format to the team: NV-2026-04-01 = Nevada · 2026 · truckload #4 lifetime · pallet #1 in the load.
v26 — 2026-11-09 · Location prefixes are state codes now: NV for Las Vegas, IL for Alton (NV-2026-04-01) — no more LV/AL. Existing numbers were renamed to match.
v25 — 2026-11-09 · Inside an opened pallet, the photo section now carries ONE guidance photo — the correct corner shot — instead of no picture at all. The right-vs-wrong comparison stays outside on the Pallets page only.
v24 — 2026-11-09 · Pallets can be deleted from inside the pallet workspace — their units go back to the unassigned pool, never deleted. Numbering is year + truckload + pallet now (NV-2026-04-01 = pallet 1 of the 4th Vegas truckload of 2026), seeded from the old truckload sheet, and there is only ever ONE current truckload per store: new pallets join it automatically, and the next load starts when it ships. The right/wrong photo examples moved OUT of the pallet workspace onto the Pallets page, and they now show the whole photo — nothing cropped, the full height of the pallet always visible — at one matched height.
v23 — 2026-11-09 · Opening a pallet is now stepping INTO the pallet: a full-screen workspace with a big green pallet banner on top — nothing like the list it came from, no longer a panel hanging off it.
v22 — 2026-11-08 · Bambu colors now: bright white, black, and Bambu green — the whole app (sign-in included) wears the three shades the machines do. The camera sheet stays black, like a viewfinder should.
v21 — 2026-11-08 · The app is BBL Repackaging now, and its home is bbl-repackaging.greatdealsnv.com — short, China-reachable, and the address the team should bookmark. The old Tally unit-logging form is being closed; this app replaces it.
v20 — 2026-11-08 · The model map is now read off the shop's own historical sticker photos, and it is keyed by the full badge: PF001-U and PF001-J are both P1S (same machine, different badge), PF002-A is A1, PF002-M is A1 mini, PF003-C is H2C, PF004-U is P2S. An earlier wrong guess (PF002 = P2S) was caught and removed before any such unit was logged.
v19 — 2026-11-08 · Model fields autocomplete from the whole Bambu vocabulary — there are only a few models: start typing and tap. The suggestions carry both identities, the name and the internal number (P1S · PF001), in the logging form, the pallet screen, and the record editor.
v18 — 2026-11-08 · The pallet's unit list is rebuilt for phones: each unit shows the readable model name big (P1S), the internal number small beside it, and the full serial on its own line — nothing gets squeezed under the Remove button again.
v17 — 2026-11-08 · Every model now carries both identities everywhere — the name everyone knows (P1S) and the internal model number from the sticker (PF001-U) — in unit logging, on pallets, in Records, and on the truckload manifest. The app learns the pairing: once a sticker or a person teaches it a code's name, it fills both in from then on.
v16 — 2026-11-08 · No more 'pallet X of Y' anywhere — the total is not known until the truck is full (24, 26, up to 28 in a 53-footer), so the app neither asks for it nor prints it. The pallet label is two things now: the quantity and the model(s).
v15 — 2026-11-08 · Mobile-first pass, because 90% of the team is on phones: the separate scan box is gone (a scanner types straight into the Product SN field and logs on the beep), the Log unit button now rides in a bar pinned to the bottom of the screen — same for Complete pallet — fields stack full-width on small screens, inputs are sized so iPhones never auto-zoom, and the two example photos render at matching height.
v14 — 2026-11-08 · The pallet photo examples are now the shop's real photos: the good one shows two sides with the label big and readable; the bad one is front-only with the label too small to read.
v13 — 2026-11-08 · The pallet screen teaches the photo: right/wrong examples (corner view showing 2–3 sides, never front-only) and the pallet label reminder — quantity, pallet X of Y, and the model(s), every model on a mixed-SKU pallet. Those three now live on the pallet record and print on the manifest.
v12 — 2026-11-08 · Pallets take a photo now, like the old Step 2 form did — take one with the camera or upload it right on the pallet screen; the pallet list shows which pallets have theirs.
v11 — 2026-11-08 · Box serial moved down into the optional zone — the only field up top with the capture block is the product serial, the one required field.
v10 — 2026-11-08 · The camera auto-captures: point it at the sticker, hold still, and it takes the photo itself when the frame is steady and sharp (on Android it also waits until a barcode actually decodes). The Capture button stays for anyone who wants it manual, and after 10 seconds a hint points to it.
v9 — 2026-11-08 · The flashlight just comes on quietly — no announcements or state labels on the buttons. Anyone who does not want it taps the Flashlight button to turn it off.
v8 — 2026-11-08 · Optional zone flattened further — lower contrast on its background, labels, inputs and buttons, so it sits quietly under the capture block.
v7 — 2026-11-08 · Optional fields are unfolded again — everything is on one screen — but they sit on a plainer, lower-contrast background so the eye goes to capture and the serial first.
v6 — 2026-11-08 · Fixed the camera overlay covering the whole logging screen on arrival (a style rule outranked the hidden state, so the black camera sheet sat on top of everything showing only its three buttons). The camera now opens only when you tap Take photo.
v5 — 2026-11-08 · Truckload pallet assignment is interactive now: tap pallets to multi-select, drag them between Available and On this truck (or use the move buttons), and they land on the truck as a group.
v4 — 2026-11-08 · Individual unit logging opens straight in capture mode — scan a serial and it logs on the beep, photo capture up top, every other field folded into optional details. Truckloads can now take any pallet, open or completed, not just completed ones.
v3 — 2026-11-08 · In-app camera for the sticker photo turns the phone flashlight (torch) on by itself wherever the browser allows it, and the AI read now shows a live progress indicator (spinner, elapsed time, percentage) so nobody stares at a frozen screen.
v2 — 2026-11-08 · The logging tab is now called Individual unit logging; only the serial number is required there (everything else optional); a pallet can be created right from the logging form by typing its number ("1", "5 of 28" — total never required).
v1 — 2026-11-08 · First build: access-code sign-in on the Team Hub roster, unit logging with sticker photo + AI read + confirm, duplicate warning, scanner-first pallet tagging, records board with in-place edit, truckloads with generated per-pallet / per-model manifests and a read-only share link.
Milestones only. Nothing sensitive lives on this page.